Digital View DVR-810 Manual de instrucciones descargar pdf (Pagina 42)

4. WATER MARK:

ON: Recording is overlaid by a visible watermark (“W”).

OFF: No watermark.

5. RESOLUTION: The resolutions for NTSC are 720x480, 720x240 and 360x240; the default

value is 720x240. The resolutions for PAL are 720x576, 720x288 and 360x288; the default value

is 720x288.

NOTE: The resolution determines the maximum record speed supported by the DVR.

NTSC

720x480 = 30 IPS (this IPS value is divided by the amount of cameras installed)

720x240 = 60 IPS (this IPS value is divided by the amount of cameras installed)

360x240 = 120 IPS (this IPS value is divided by the amount of cameras installed)

6. RECORD MODE:

REWRITE: Continue recording. Disk will begin overwriting if it is full.

STOP: Stop recording when disk is full.

7. AUTOWRITE WITHIN: You can set DVR to automatically overwrite after the selected

number of days. If you do not wish to use this function, simply select “0”.

8. PRE-ALARM RECORDING

Select “YES” to enable pre-alarm recording function. Select “NO” to disable pre-alarm recording

function.

9. RELAY OUT

By selecting “1”, user can easily identify whether DVR is recording or not if relay output is

connected to a signaling device. Select “NONE” if you do not wish to identify recording status.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 149 150

Sin comentarios

Digital View DVR-810 Manual de instrucciones Pagina 42